Codice: Seleziona tutto
#
# *+.+**+.+**+.+**+.+**+.+**+.+**+.+*
# *+.+* Auspice Services *+.+*
# *+.+**+.+**+.+**+.+**+.+**+.+**+.+*
#
# This is Auspice Services sample config file
# Carefully read all this config
# Don't touch this
NET:newnet.conf
# #############################################################
# Connection Setting #
# #############################################################
# Remote Server, the irc server where services would connect to
# ex: S: 127.0.0.1
S:tuoip(non mettere 127.0.0.1 se non sei su linux)
# Port where Services will connect to
P:7000
# Connect Password where it's place in C/N line in server
# services connect to.
X: password per linkare
# Services Server Name
N:services.tuanet.net
# Server Numeric for UnrealIRCd only
R:10
# Services Describe
D:Servizi per questo IRC Network
# Services User for NickServ/ChanServ...
U:services.tuanet.net
# Services Host for NickServ/ChanServ...
H:services.tuanet.net
# Network Name
A:tuanet.net
# ***** Service Master Nick Name ******
# This nickname must first register.
M: tuonick
# ######################################################################
# Services Bot Setting #
# ######################################################################
# Define Services Name Follow
MEMOSERV:MemoServ
HELPSERV:HelpServ
OPERSERV:OperServ
ROOTSERV:RootServ
GLOBAL:Global
# Spam Detector
SPAMNICK:Guest18920
SPAMUSER:Sophoan
SPAMHOST:pl-32.camnet.com.kh
# ########################################################
# NickServ #
# ########################################################
# Services Nick Name
NICKSERV:NickServ
# Auto set mode on register
# 1= Enable 0= Disable
KILL:0
SECURE:0
PRIVATE:0
# Maximum permitted mask enteries per nick access list.
# Default: 20; 0 Disables
U_ACC_MAX:20
# Ammount of seconds to automatically release an enforced nick.
# Default: 30
RELEASE:30
# #########################################################
# ChanServ #
# #########################################################
# ChanServ Nick name
CHANSERV:ChanServ
# Maximum permitted enteries per channel access list.
# Access list = AVOICE+HOP+AOP+SOP+CFOUNDER as a sum.
# Default: 900; 0 Disables
C_ACC_MAX:900
# Changes default #Snoop channel.
SET_SNOOP:1
SNOOPCHAN:#s2r
# Maximum channels permitted to be registered per user.
# Default: 20, 0 = Disable
CHANREG:20
# Maximum amount of auto-kick's for a channel.
# Default: 100, 0 = Disable
AKICK:100
# Maximum channel suspensions services will keep.
# Default: 256
SUSPEND:256
# Defines how long, in seconds, ChanServ should retain in
# a channel after a masskick or suspension.
# Default: 15
CHANNEL_INHABIT:15
# TOPICFIX This option will prevent
# services from adding duplicate nicks to the topic.
# Enable: 1, Disable: 0;
TOPICFIX:1
# Number of seconds which database update/expires
# 900 = 15 minutes = 15 * 60
UPDATE:900
# Should not touch, if you running a slow server you may put it to 5
TIMEOUT:3
# Limite badpass identify to Chan/Nick Serv
PW_LIMIT:4
# Number of seconds which services forget the badpass attempts
PW_TIMEOUT:1800
# Number of Memo permit per user
MEMOMAX:20
# Number of seconds that must elapse sending memo
MEMO_WAIT:5
# Max akill add, 0 disable
AKILLS:128
# Maximum permitted "jupitered" servers. Default: 12; 0 Disables
JUPES:12
# Maximum permitted triggers. Default: 128; 0 Disables
TRIGGERS:128
# Default AKILL expiry time in seconds. Default: 86400 (1 day)
AKILLEXP:86400
# Max charaters permit in memo
MEMO_LEN:225
# Enable or Disable sending log files via email
LOGS:0
# Enable Services +a umode flag. With this setting
# enabled, any services admin identifying to their
# nick will have services set umode +a.
# This option also allows services admins to use /samode.
# Enable = 1; Disable = 0; Default = 1
UMODE_a:1
# Maximum permitted Services q:lines. These are
# viewed via /stats q, not /stats Q.
# Default = 64; 0 Disables
QLINES:64
# Maximum permitted Services global z:lines.
# Default: 128, 0 Disables
ZLINES:128
# Allow users to have their memos sent via email.
# Sendmail must be working on the computer services
# are running from. Default = 1; 0 Disables
EMAIL:0
# When enabled, users will be /kill'ed off the network with
# the specified AKILL reason the operator gave. When disabled,
# the generic AKILL message will be given. (Found in messages.h)
# 1 = Enable, 0 = Disable. Default: 1
AKILL_REASON:1
# This option is not limited entirely to snoop, but also log files.
# When enabled, extra information will be logged, and if snoop
# is enabled, sent to the snoop channel. On larger networks,
# it may be wise to disable this to save on disk space for logs
# and avoid being flooded in the snoop channel. Only non-essential
# information will be stripped, ie: valid identifies, etc.
# 1 = Enable, 0 = Disable. Default: 1
EXTRA_SNOOP:0
# Number of registrations until services will
# automatically update the databases, regardless
# of next scheduled event. Valid for nicks & channels.
# 0 = Disables, 1 = Enables; Default: 0
REG_SAVES:0
# This allows services to display the uptime in the MOTD.
# Enable: 1, Disable: 0; Default: 1
UPTIME:1
# This allows services to display the time time until the next
# database update in the MOTD.
# Enable: 1, Disable: 0; Default: 1
MOTD_UPDATE:1
# Allow ignore code to be used. When enabled, services
# admins will be able to make use of the OS IGNORE
# command to have services ignore all commands from
# a nick!user@host.
# Default = 1; 0 Disables
SET_IGNORE:1
# Have services set Read Only mode. Any commands
# that may effect databases will not be permitted.
# Default: 0; 1 Enables; 0 Disables;
SET_RO:0
# This feature will allow services to create a duplicate
# back-up database after <num> database updates.
# The backup database will be stored in data/backup.
# Default: 10, 0 Disables
BACKUP:10
# There address of where your e-mail would go
# Use "which sendmail" to find the path
SENDMAIL_PATH:/usr/sbin/sendmail
# ################################################################
# Clone Setting #
# ################################################################
# Number of seconds between consecutive clone warming from
# the same host. Default: 10
# Note: -It will not keep warming unless more clones ware loaded
CLONE_WARN:1
# ########################################################
# HTML #
# ########################################################
# Enable/Disable dump channel and netstats.
HTML:1
# The address of where your channel html file would save
# Ex: /home/user/html/channel.html
HTML_PATH:channel.html
# The address of where your network statistic file would save
# /home/user/html/netstats.html
NETSTATS_PATH:netstats.html
